Wood Fence Panels are gaining wider acceptance among people these days. These panels not only provide protection to the property and other assets but they also have a strong aesthetic appeal. A wide variety of designs and materials are available in these panels. You can choose from a minimal wood fence design that provides privacy or you can go in for a picket fencing that allows you to display your beautiful garden. Some of the different types of wood fence panels are discussed below.
Pressure treated composite decking boards wood fence panels are a reasonably priced option. In this kind of fence, the wood is pressure treated and this makes it resistant to the harsh elements of nature. These types of panels are usually found in a greenish color which tends to turn gray with the passage of time. Therefore, it is advisable to treat these panels with a sealer or stain.
Redwood panels are very beautiful to look at and are ideal as a border fence. They have a natural resistance to insects and mildew and do not need to be stained because of their natural color. To increase the life of these wooden panels it is advisable to use oil or a coating of shellac.
Cedar panels
Cedar panels are a great visual treat and hence one of the most preferred choices. These panels do not rot easily and can easily complement both the Northern White Cedar as well as the Western Red Cedar. These types of fences do not require a high degree of maintenance.
After deciding upon the material of the wooden fence the next step is to choose the design of your wooden fence panel. Flat top panel design with a dog ear is a popular choice. It not only helps to mark the boundary, control the noise but also provides a visual barrier. These wood fence panels are usually around five feet and are used to contain children and pets. They are used extensively in commercial applications.
Composite shadowbox wooden panels are highly suitable for people who are looking for privacy. These panels are available in several designs and provide a striking frame for the gardens. These panels allow the air to flow through the fence but obstruct the vision. As a result they are a perfect choice for areas that are large and open.
And the last option is the spaced picket wooden panels. These are designs from the old world with a huge visual appeal. These fences are suitable for the side and front of the yards.
An Introduction To Fence Panels
Fences are usually made up of segments, or fence panels, rather than a single piece that runs along the entire perimeter. Fencing panels can be made of wood, metal, vinyl, concrete, or some other composite material. Each panel has vertical or horizontal boards on the outer face, and two or more cross members holding them together. Having fences split up into multiple, separately sold components (or sets) offers a greater degree of flexibility during installation.
A typical fence panel is 5 to 8 feet in length. To determine the number of panels needed, you first need to settle on a standard panel length. Then you would measure the number of feet of the perimeter being enclosed, and divide this by the the length of each panel. Posts are installed in intervals of the panels’ length (e.g. one post every 8 feet), and each post is centered between the panels, which are usually fastened with lag screws – though some metal posts are prepunched for easier mounting.
Wood fencing panels
Fence panels for residential use are typically made from some type of wood, vinyl or metal. Wood fencing panels are a frequent choice. They’re not only economical for purchasing prefabricated, but also idea for assembling from scratch. Spruce, redwood and cedar tend to be most weather resistant of woods for this purpose. Wood is an ideal choice for garden fencing. composite fencing panels Vinyl, while slightly more expensive up front, has much lower maintenance costs, since it doesn’t warp, chip or weather with exposure to rain. Vinyl fence panels can also be purchased in a variety of colors that don’t require any additional painting.
For metal residential fences, aluminum and wrought iron fence panels are the main choices. Aluminum is cheaper and lighter than wrought iron, yet offers much of the same look and weather resistance due to the power coating that most manufacturers apply to them. Aluminum fence panels are most frequently used for pools, and general purpose decorative ornamental fencing.
Andre Kibbe is the editor of Fence and Gate, an information resource and commercial and residential fencing, and enclosures of all types. To learn more about fencing panels, please visit Fence and Gate.
